Outdoor Splice/ Wall Mount Exposures
INS OUTDOOR POLYCARBONATE FIBER ENCLOSURES
- OSP protected with special gasketing
- Polycarbonate, UV-Resistant
- Up to 96 port capacity
- Special protection tubes and bend radian for protecting the incoming fiber from bending and guiding the fibers to the specially designed splice cassettes in a professional way
- 100% Compatible to Bellcore GR-326 standards
- LC Duplex and SC Simplex Adaptors can be installed inside
Need a pre loaded enclosure?
Inquire with our Sales Team about pre loaded enclosure for quicker installation.
INS 300 SERIES ENCLOSURE
The 300 series is a small outdoor box with IP65 rating. It features (2) inlets at the bottom of enclosure, cable management and accommodates (4) SC simplex adapters or LC duplex adapters for terminating up to 8 fibers.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-300
OSP Enclosure, up to 8 fibers (LC) with splicing/cable management
7” x 6.5” x 1.7”
.74lbs(.34g)
INS 400 SERIES ENCLOSURE
The 400 series termination box is IP65 rated and made with polycarbonate for UV-Resistance. Accommodates (12) SC simplex adapters or duplex LC adapters for up to 24 fibers. Splices can be stored behind adapter panel and cable management is located on back of enclosure. (3) inlets provided on bottom with gasketed ports.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-400
OSP Enclosure, up to 24 fibers (LC) with splicing/cable management
7.8” x 7.8" x 1.9"
1.1lbs(.52kg)
P45-F1-400SCAPC6
MDU box loaded with 6 SC/APC Pigtail
7.8” x 7.8" x 1.9"
N/A
P45-F1-4001X4SCAPC
OSP Enclosure, up to 24 fibers (LC) with splicing/cable management
7.8” x 7.8" x 1.9"
N/A
P45-F1-4001X8SCAP
MDU box loaded with 1x8 PLC splitter SC/APC Pigtail
7.8” x 7.8" x 1.9"
N/A
INS 700 SERIES ENCLOSURE
The 700 series is manufactured for outside environments with IP54 rating and special gasketing. Has (2) cable inlet ports on each side and up to 5 drop cable ports in center. Made of UV-resistant polycarbonate. 24 simplex SC cutouts in panel, accept SC Simplex, MTP/MPO as well as LC Duplex adapters for capacity of 24 or 48(LC) fibers. Fusion splice tray included.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-700
OSP Enclosure, up to 48 fiber (LC) with splicing/cable management
10.7” x 9.25” x 3.3”
1.7lbs ( .78kg)
P45-F1-7001X2SCAPC
MDU box loaded with 1x2 PLC splitter SC/APC Pigtail
10.7” x 9.25” x 3.3”
N/A
P45-F1-7001X4SCAPC
MDU box loaded with 1x4 PLC splitter SC/APC Pigtail
10.7” x 9.25” x 3.3”
N/A
P45-F1-7001X8SCAPC
MDU box loaded with 1x8 PLC splitter SC/APC Pigtail
10.7” x 9.25” x 3.3”
N/A
P45-F1-7001X16SCAPC
MDU box loaded with 1x16 PLC splitter SC/APC Pigtail
10.7” x 9.25” x 3.3”
N/A
INS 800 SERIES ENCLOSURE
The 800 series has 16 outlet ports for drop cables and 2 inlet ports. Made of UV-resistant polycarbonate. IP54 protected with special gasketing. Easy side latching system with lockable door. (16) simplex SC cutouts on panel accommodating (16) SC or MTP/MPO adapters or (32) LC connectors using duplex mating adapters. Also install PLC splitters inside enclosure for PONs.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-800
OSP Enclosure, up to 32 fiber (LC) with splicing/cable management
14.7” x 9.3” x 3.9”
2.4lbs(1.1kg)
P45-F1-8001X8SCAPC
MDU box loaded with 1x2 PLC splitter SC/APC Pigtail
14.7” x 9.3” x 3.9”
N/A
P45-F1-8001X16SCAPC
MDU box loaded with 1x4 PLC splitter SC/APC Pigtail
14.7” x 9.3” x 3.9”
N/A
INS 600 SERIES ENCLOSURE
The 600 series is designed for harsh environments with IP65 rating and gasket seal on the door. The polycarbonate is UV resistant. Comes with standard interconnect panel with duplex SC cutouts. Install SC duplex, MPO/MTP, or LC quad mating sleeves/ adapters to accept up to 48 or 96 fibers. Splice Trays are included and mounted on the back wall behind the hinged adapter panels. Some cable management accessories included as well as grounding screw.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-600
OSP Enclosure, up to 96 fiber (LC) with splicing/cable management
16.5” x 13.4” x 5.1”
2.8lbs(1.3kg)
P45-F1-6001X16SCAPC
MDU box loaded with 1x16 PLC splitter SC/APC Pigtail
16.5” x 13.4” x 5.1”
N/A
P45-F1-6001X32SCAPC
MDU box loaded with 1x32 PLC splitter SC/APC Pigtail
16.5” x 13.4” x 5.1”
N/A
Outdoor Enclosures / Splice Trays
INS FIBER DISTRIBUTION ENCLOSURE (Strand Mount Only)
With easy access to front loaded with 16 SC/APC adapters separate rear access equiped with one 24ct splice tray and room for cable management.
P45-F1-DTESCA-24612
Aerial Strand Mount only - 1-16 SC/APC Drop Adapters (1) 24ct Splice Tray (1) 12CT Pigtail (1) 6CT Pigtail - SC/APC Ends - All Grommets included for 12-144 Fiber Counts
INS INLINE HINGED ENCLOSURE
This hinged closure is designed to manage ber splices with ease of maintenance for installers. Its versatility and durability allow direct buried, underground and aerial applications. It offers a simple re-entry system with a boltless mechanism that does not require an electric hand tool. Four splice trays included.
P45-F1-ZOFC-B1
INS Inline Enclosure - (6) cable ports, (4) splice trays, Accessory Kit
13”x 7.5”x 4”
P45-P11-B3-202F
8 Hole 3mm O.D. Cable Grommet
N/A
P45-P11-B4-202G
2 Hole 8mm O.D. Cable Grommet
N/A
P45-P11-G1-202A
4 Hole 3mm O.D. Cable Grommet
N/A
P45-P11-G1-202K
12-17mm, Main O.D. Cable Grommet
N/A
P45-P11-G1-202R
8-12mm, Main O.D. Cable Grommet
N/A
P45-P11-G1-202P
Pre-Connectorized Cable Grommet
N/A
P45-P11-G1-1031
Bracket “B”
N/A
*Accessory Kit: Insulation tape, grease, cable ties, protective tubing, grommets
INS FIBER OPTIC SPLICE CLOSURE
This INS Outside Plant Direct Burial Closure offers the perfect choice for low fiber count distribution applications involving butt and inline installations. The compact size and rugged design allow the closure to be deployed in below grade, aerial and buried installations. Dimensions: 21” L x 8” W x 4” H Weight: 9lbs.
- 4 Entry Ports
- Accepts cables from 10mm - 22mm diameter
- Can be congurated for butt or in-line applications
- (1) Integrated splice tray included
- Permanent waterproof sealing requires no re-entry kit
- IP rating:66 (Equal to NEMA 4 and 4X)
- Direct Burial or Aerial applications
P45-F1-OSPDBC24
INS Fiber Optic Splice Closure - 24 Fiber
P45-F1-OSPDBC48
INS Fiber Optic Splice Closure - 48 Fiber
P45-F1-OSPTRAY
Splice Tray 12 but expandable to 24 Fiber For F1-OSPDBC-XX Closures
INS ALUMINUM SPLICE TRAYS
The INS aluminum splice trays are compact, lightweight, and available with a variety of splice holding chips and cover options. All trays are pre-configured for standard heat shrink fusion splices unless otherwise stated. Any stocked splice holder chip can be pre-loaded into this splice tray. Each splice tray features a mounting hole to fasten the tray down using a mounting stud and nut. Self adhesive Velcro dots are included with F1-SPL12, F1-SPL24 and F1-6707 to secure the tray in place.
P45-F1-SPL12
Aluminum Splice Tray, 12 Position, Fusion Splice Chip, Rigid
6.5"L x 4.68"W x .42"H
P45-F1-SPL24
Aluminum Splice Tray, 24 Position, Fusion Splice Chip, Rigid
11.72"L x 3.99"W x .41"H
P45-F1-SPL24-8.5
Aluminum Splice Tray, 24 Position
8.5”L x 5”W x .42”H
P45-F1-8735C
Aluminum Splice Tray, 12 Position, Clear Plastic Cover, Fusion Splice Chip, Rigid
7.13"L x 4.13"W x .38"H
P45-F1-8729G
Aluminum Splice Tray, 12 Position, Clear Plastic Cover, Fusion Splice Chip, Rigid
11.75"L x 4"W x .38"H
P45-F1-6707BLKF
Aluminum Splice Tray, 12 Position, Fusion Splice Chip, Soft
7.5"L x 4"W x .63"H
P45-F1-6707BLKM
Aluminum Splice Tray, 12 Position, Mechanical Splice Chip, Soft
7.5"L x 4"W x .63"H
P45-F1-6707BLKR
Aluminum Splice Tray, 12 Position, Bare Fiber Splice Chip, Rigid
7.5"L x 4"W x .63"H
P45-F1-6707BLKH
Aluminum Splice Tray, 6 Position, Fusion Splice Chip, Rigid
7.5"L x 4"W x .63"H
INS PLASTIC SPLICE TRAYS
The INS Splice Tray is injection molded using UL94 re retardant material. The tray is designed to fit in most splice closures and can accommodate 12 fusion, mechanical, or bare fiber splices. Any stocked splice holder chip can be pre-loaded into this splice tray. Features include: Fiber routing molded into the tray, fiber tie down holes, snap or slide together construction, designation label, self adhesive Velcro dots to secure the tray in place, and nylon cable tie wraps.
P45-F1-6808
Plastic Splice Tray, 12 Position, Fusion Splice Chip, Rigid
7.1” x 4.25” x .48”
P45-F1-6808M
Plastic Splice Tray, 12 Position, Mechanical Splice Chip, Soft
7.1” x 4.25” x .48”
P45-F1-6808BA
Plastic Splice Tray, 12 Position, Bare Fiber Fusion Splice Chip, Rigid
7.1” x 4.25” x .48”