Indoor Wall Mount Enclosures
INS MINI WALL MOUNT ENCLOSURE
The INS Mini Wall Mount has capacity for (1) or (2) LGX style adapter plates, depending on the size of the enclosure chosen. Ideal for patching smaller quantities of fibers in a compact form factor. Fiber enters and exits from the bottom of the closure, and a cable spool and tie down stance provides fiber management options. A single door is removable and lockable with a padlock (sold separately).
P45-F1-MW1X
1 Plate Mini (Unloaded) Black
9.18" x 6.38" x 2.625"
P45-F1-MW1X-BW
1 Plate Mini (Unloaded) Off White
9.18" x 6.38" x 2.625"
P45-F1-MW2X
2 Plate Mini (Unloaded) Black
9.18" x 6.38" x 2.625"
P45-F1-MW2X-BW
2 Plate Mini (Unloaded) Off White
9.18" x 6.38" x 2.625"
INS ECONOMY WALL MOUNT ENCLOSURES
The INS Economy Wall Mount has capacity for (2) or (4) LGX style adapter plates depending on the size of the enclosure chosen. It features a cable spool, bridge stances and a mounting stud and nut to secure splice trays. The lockable inner door (lock/key included) provides safe storage of incoming cable while allowing the technician to manipulate outgoing fiber patches. The outer door is removable and lockable with a padlock (sold separately). Accommodates QTY (2) splice trays approximately 7”L x 4”W (Ex. F1-SPL12). Ask an INS sales associate about pre-loading the enclosure with fiber pigtails, splice trays and adapter plates.
P45-F1-EW2X
2 Plate Economy (Unloaded) Black
10.33" x 12.12" x 3.81"
P45-F1-EW2X-BW
2 Plate Economy (Unloaded) Off White
10.33" x 12.12" x 3.81"
P45-F1-EW4X
4 Plate Economy (Unloaded) Black
12.24" x 12.12" x 3.81"
P45-F1-EW4X-BW
4 Plate Economy (Unloaded) Off White
12.24" x 12.12" x 3.81"
INS DELUXE WALL MOUNT ENCLOSURES
The INS Deluxe Wall Mount has capacity for (2), (4), or (8) LGX style adapter plates depending on the size of the enclosure chosen. It features a larger splicing bay and more cable spooling brackets than the Economy version. Bridge stances and a splice tray mounting stud and nut are also included for easy installation of splice trays. The two front doors are removable to give unrestricted access during installation, and each door is also lockable with a padlock (sold separately) to provide security when in use. Accommodates QTY (2) splice trays approximately 7”L x 4”W (Ex. F1-SPL12) or 11.72”L x 4”W (Ex. F1-SPL24). Ask an INS sales associate about pre-loading the enclosure with fiber pigtails, splice trays and adapter plates.
P45-F1-DW2X
2 Plate Deluxe (Unloaded) Black
13.16" x 14.44" x 3.06"
P45-F1-DW2X-BW
2 Plate Deluxe (Unloaded) Off White
13.16" x 14.44" x 3.06"
P45-F1-DW4X
4 Plate Deluxe (Unloaded) Black
13.16" x 14.44" x 3.06"
P45-F1-DW4X-BW
4 Plate Deluxe (Unloaded) Off White
13.16" x 14.44" x 3.06"
P45-F1-DW8X
8 Plate Deluxe (Unloaded) Black
13.16" x 14.51" x 5.60"
P45-F1-DW8X-BW
8 Plate Deluxe (Unloaded) Off White
13.16" x 14.51" x 5.60"
INS PATCH AND SPLICE WALL MOUNT ENCLOSURE
The INS Patch and Splice Wall Mount enclosure is lightweight and easy to install. There is capacity for (2), (4), or (8) LGX style adapter plates depending on the size of the enclosure chosen. This unit features a lockable (lock/key included) compact housing that allows both splicing and connecting of fiber optic cables. FF-WM012 accommodates QTY (1) splice tray approximately 7”L x 4”W (Ex. F1-SPL12). FF-WM024 accommodates QTY (2) splice trays approximately 7”L x 4”W (Ex. F1- SPL12). FF-WM048 accommodates QTY (4) splice trays approximately 7”L x 4”W (Ex. F1-SPL12) or 11.72”L x 4”W (Ex. F1-SPL24).
P45-FF-WM012
2 Plate Patch and Splice (Unloaded) Off White
6" x 12" x 4.5"
P45-FF-WM012-BLK
2 Plate Patch and Splice (Unloaded) Black
6" x 14" x 4.5"
P45-FF-WM024
4 Plate Patch and Splice (Unloaded) Off White
11" x 14" x 4.5"
P45-FF-WM024-BLK
4 Plate Patch and Splice (Unloaded) Black
11" x 12" x 4.5"
P45-FF-WM048
8 Plate Patch and Splice (Unloaded) Off White
16" x 20" x 6.5"
P45-FF-WM048-BLK
8 Plate Patch and Splice (Unloaded) Black
16" x 20" x 6.5"
INS WALL MOUNT SPLICE ENCLOSURE
The INS Wall Mount Splice Enclosure provides a secure splice bay for up to (12) splice trays. Cable entry and exit holes are now located on the tops and sides of the unit, and are protected by 1.25” dust-proof grommets. Both doors are removable for easy access and lockable for added security. Cable management rings are moveable within the unit and cable tie-downs are located throughout the unit. Constructed from lightweight, sturdy 16 gauge steel for easy installation. Recommended splice tray is 11.72”L x 4”W (Ex. F1-SPL24). Splice trays not included.
P45-F1-SW12T
INS Wall Mount Splice Enclosure, 12 Trays, Top/Side Entry
17.25” x 21.25” x 4.68”
INS OUTDOOR POLYCARBONATE FIBER ENCLOSURES
- OSP protected with special gasketing
- Polycarbonate, UV-Resistant
- Up to 96 port capacity
- Special protection tubes and bend radian for protecting the incoming fiber from bending and guiding the fibers to the specially designed splice cassettes in a professional way
- 100% Compatible to Bellcore GR-326 standards
- LC Duplex and SC Simplex Adaptors can be installed inside
Need a pre loaded enclosure?
Inquire with our Sales Team about pre loaded enclosure for quicker installation.
INS 300 SERIES ENCLOSURE
The 300 series is a small outdoor box with IP65 rating. It features (2) inlets at the bottom of enclosure, cable management and accommodates (4) SC simplex adapters or LC duplex adapters for terminating up to 8 fibers.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-300
OSP Enclosure, up to 8 fibers (LC) with splicing/cable management
7” x 6.5” x 1.7”
.74lbs(.34g)
INS 400 SERIES ENCLOSURE
The 400 series termination box is IP65 rated and made with polycarbonate for UV-Resistance. Accommodates (12) SC simplex adapters or duplex LC adapters for up to 24 fibers. Splices can be stored behind adapter panel and cable management is located on back of enclosure. (3) inlets provided on bottom with gasketed ports.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-400
OSP Enclosure, up to 24 fibers (LC) with splicing/cable management
7.8” x 7.8" x 1.9"
1.1lbs(.52kg)
P45-F1-400SCAPC6
MDU box loaded with 6 SC/APC Pigtail
7.8” x 7.8" x 1.9"
N/A
P45-F1-4001X4SCAPC
OSP Enclosure, up to 24 fibers (LC) with splicing/cable management
7.8” x 7.8" x 1.9"
N/A
P45-F1-4001X8SCAP
MDU box loaded with 1x8 PLC splitter SC/APC Pigtail
7.8” x 7.8" x 1.9"
N/A
INS 700 SERIES ENCLOSURE
The 700 series is manufactured for outside environments with IP54 rating and special gasketing. Has (2) cable inlet ports on each side and up to 5 drop cable ports in center. Made of UV-resistant polycarbonate. 24 simplex SC cutouts in panel, accept SC Simplex, MTP/MPO as well as LC Duplex adapters for capacity of 24 or 48(LC) fibers. Fusion splice tray included.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-700
OSP Enclosure, up to 48 fiber (LC) with splicing/cable management
10.7” x 9.25” x 3.3”
1.7lbs ( .78kg)
P45-F1-7001X2SCAPC
MDU box loaded with 1x2 PLC splitter SC/APC Pigtail
10.7” x 9.25” x 3.3”
N/A
P45-F1-7001X4SCAPC
MDU box loaded with 1x4 PLC splitter SC/APC Pigtail
10.7” x 9.25” x 3.3”
N/A
P45-F1-7001X8SCAPC
MDU box loaded with 1x8 PLC splitter SC/APC Pigtail
10.7” x 9.25” x 3.3”
N/A
P45-F1-7001X16SCAPC
MDU box loaded with 1x16 PLC splitter SC/APC Pigtail
10.7” x 9.25” x 3.3”
N/A
INS 800 SERIES ENCLOSURE
The 800 series has 16 outlet ports for drop cables and 2 inlet ports. Made of UV-resistant polycarbonate. IP54 protected with special gasketing. Easy side latching system with lockable door. (16) simplex SC cutouts on panel accommodating (16) SC or MTP/MPO adapters or (32) LC connectors using duplex mating adapters. Also install PLC splitters inside enclosure for PONs.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-800
OSP Enclosure, up to 32 fiber (LC) with splicing/cable management
14.7” x 9.3” x 3.9”
2.4lbs(1.1kg)
P45-F1-8001X8SCAPC
MDU box loaded with 1x2 PLC splitter SC/APC Pigtail
14.7” x 9.3” x 3.9”
N/A
P45-F1-8001X16SCAPC
MDU box loaded with 1x4 PLC splitter SC/APC Pigtail
14.7” x 9.3” x 3.9”
N/A
INS 600 SERIES ENCLOSURE
The 600 series is designed for harsh environments with IP65 rating and gasket seal on the door. The polycarbonate is UV resistant. Comes with standard interconnect panel with duplex SC cutouts. Install SC duplex, MPO/MTP, or LC quad mating sleeves/ adapters to accept up to 48 or 96 fibers. Splice Trays are included and mounted on the back wall behind the hinged adapter panels. Some cable management accessories included as well as grounding screw.
* Adapters sold separately
* All spice trays included in each enclosure
P45-F1-600
OSP Enclosure, up to 96 fiber (LC) with splicing/cable management
16.5” x 13.4” x 5.1”
2.8lbs(1.3kg)
P45-F1-6001X16SCAPC
MDU box loaded with 1x16 PLC splitter SC/APC Pigtail
16.5” x 13.4” x 5.1”
N/A
P45-F1-6001X32SCAPC
MDU box loaded with 1x32 PLC splitter SC/APC Pigtail
16.5” x 13.4” x 5.1”
N/A